Classification:
Cementitious grout binder
Product Introduction
Egm-100 Epoxy Resin Grouting material includes three components: A (resin), B (hardener), and C (filler). This product uses high-quality resin and refined filler, 100% solid content, and does not contain volatile substances such as solvents that are harmful to the human body. After the three components contained in each group of materials are completely mixed at room temperature, they can be used without adding additional ingredients.
Scope of application:
1. Secondary grouting installation of high vibration equipment such as compressors, pumps, presses, crushers, ball mills, etc.
2. Grouting of equipment foundation areas susceptible to chemical corrosion.
3. Grouting in areas subject to strong pressure, such as track foundations and bridge support seats.
4. Anchor bolts, steel bar planting and concrete reinforcement of building structures.
5. Use as self-leveling mortar on concrete, stone, steel, wood and other surfaces.
6. Rigid connections of iron, iron tie rods and tie rods.
Product Features:
1. High strength and early strength: It can provide early strength with much higher mechanical properties such as compression and bonding than cement-based materials.
2. Low exotherm peak: can provide up to 120 minutes (25°C) of operation time, suitable for large volume grouting.
3. No shrinkage: Ensure that the grouting layer is in full contact with the bearing surface after final formation, ensuring high accuracy of equipment installation.
4. Excellent anti-creep performance: Epoxy grouting materials can be used for a long time in harsh physical conditions of freeze-thaw alternating vibration and pressure at -50°C to +80°C without plastic
deformation, ensuring long-term accurate positioning of equipment.
5. Excellent toughness: Epoxy grouting material can dissolve any dynamic load transmitted by dynamic equipment that may cause the cement-based grouting layer to burst.
6. Corrosion resistance: can withstand long-term contact corrosion from chemicals such as acid, alkali, salt, grease, etc.
Product Parameters
Project | Performance Indicators |
Fluidity(mm) | ≥230 |
A+B(100g) Curing time(min) | 50~70 |
Compressive strength (MPa) | ≥50 |
≥65 | |
≥95 | |
Flexural strength(MPa) | ≥20 |
Bond strength(MPa) | ≥3 |
Density kg/L(A+B+C) | 2.1~2.2 |
Hot Products
Start Enhancing Your Business With a Concrete Solution Today
Our products have undergone rigorous testing at our national testing laboratory (CABR testing center co., ltd). Renowned Fortune Global 500 firms such as China Railway Group Limited, China Communications Construction Company Limited, and Sinohydro are among our esteemed clients.
Navigation
Navigation
Contact Us
Tel.:
+86 153 7387 2353 Manager Guo
+86 15901493336 Manager Wang
E-mail:
WhatsApp:
Get in Touch
Get in Touch